Home page Home page

Jevtana
cabazitaxel

Package leaflet: Information for the patient


JEVTANA 60 mg concentrate and solvent for solution for infusion

cabazitaxel


Read all of this leaflet carefully before you start using this medicine because it contains important information for you.


Reporting of side effects

image

If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this leaflet. You can also report side effects directly via the national reporting system listed in Appendix V. By reporting side effects you can help provide more information on the safety of this medicine.


  1. How to store JEVTANA


    Keep this medicine out of the sight and reach of children.


    Do not use this medicine after the expiry date which is stated on the outer carton and on the label of the vials after EXP. The expiry date refers to the last day of that month.


    Do not store above 30°C. Do not refrigerate.


    Information about storage and the time to use JEVTANA, once it has been diluted and is ready to use, is described in the section “Practical information for medical or healthcare professionals on preparation, administration and handling of Jevtana“.


    Any unused product or waste material should be disposed of in accordance with local requirements. These measures will help to protect the environment.

  2. Contents of the pack and other information What JEVTANA contains

    The active substance is cabazitaxel. One ml of concentrate contains 40 mg cabazitaxel. One vial of concentrate contains 60 mg cabazitaxel.


    The other ingredients are polysorbate 80 and citric acid in the concentrate, and ethanol 96% and water for injections in the solvent (see section 2 “JEVTANA contains alcohol”).

    Note: Both the JEVTANA 60 mg/1.5 ml concentrate vial (fill volume: 73.2 mg of cabazitaxel/1.83 ml) and the solvent vial (fill volume: 5.67 ml) contain an overfill to compensate for liquid loss during preparation. This overfill ensures that after dilution with the ENTIRE contents of the accompanying solvent, there is solution containing 10 mg/ml cabazitaxel.


    What JEVTANA looks like and contents of the pack

    JEVTANA is a concentrate and solvent for solution for infusion (sterile concentrate). The concentrate is a clear yellow to brownish-yellow oily solution.

    The solvent is a clear and colourless solution. One pack of JEVTANA contains:

    • One single useclear glass vial, closed with a grey rubber stopper sealed by an aluminium cap with a light green plastic flip-off cover, containing 1.5 ml (nominal volume) concentrate.

    • One single use clear glass vial, closed with a grey rubber stopper sealed by a gold colour aluminium cap with a colourless plastic flip-off cover, containing 4.5 ml (nominal volume) solvent.


Marketing Authorisation Holder

sanofi-aventis groupe 54, rue La Boétie

F - 75008 Paris France


Manufacturer


image

Sanofi-Aventis Deutschland GmbH Industriepark Höchst

65926 Frankfurt am Main Germany


For any information about this medicine, please contact the local representative of the Marketing Authorisation Holder:


België/Belgique/Belgien

Sanofi Belgium

Tél/Tel: +32 (0)2 710 54 00

Lietuva

Swixx Biopharma UAB Tel: +370 5 236 91 40


България

Swixx Biopharma EOOD

Тел.: +359 (0)2 4942 480

Luxembourg/Luxemburg

Sanofi Belgium

Tél/Tel: +32 (0)2 710 54 00 (Belgique/Belgien)


Česká republika sanofi-aventis, s.r.o. Tel: +420 233 086 111

Magyarország

SANOFI-AVENTIS Zrt., Tel.: +36 1 505 0050


Danmark

Sanofi A/S

Tlf: +45 45 16 70 00

Malta

Sanofi S.r.l

Tel: +39 02 39394275


Deutschland

Sanofi-Aventis Deutschland GmbH Tel.: 0800 04 36 996

Tel. aus dem Ausland: +49 69 305 70 13

Nederland

Genzyme Europe B.V. Tel: +31 20 245 4000


Eesti

Swixx Biopharma OÜ Tel: +372 640 10 30

Norge

sanofi-aventis Norge AS Tlf: +47 67 10 71 00


Ελλάδα

sanofi-aventis AEBE

Τηλ: +30 210 900 16 00

Österreich

sanofi-aventis GmbH Tel: +43 1 80 185 – 0


España

sanofi-aventis, S.A. Tel: +34 93 485 94 00

Polska

sanofi-aventis Sp. z o.o. Tel.: +48 22 280 00 00

France

sanofi-aventis France Tél: 0 800 222 555

Appel depuis l’étranger : +33 1 57 63 23 23

Portugal

Sanofi - Produtos Farmacêuticos, Lda Tel: +351 21 35 89 400


Hrvatska

Swixx Biopharma d.o.o. Tel: +385 1 2078 500

România

Sanofi Romania SRL Tel: +40 (0) 21 317 31 36


Ireland

sanofi-aventis Ireland Ltd. T/A SANOFI Tel: +353 (0) 1 403 56 00

Slovenija

Swixx Biopharma d.o.o. Tel: +386 1 235 51 00


Ísland

Vistor hf.

Sími: +354 535 7000

Slovenská republika Swixx Biopharma s.r.o. Tel: +421 2 208 33 600


Italia

Sanofi S.r.l.

Tel: +39.800.536389

Suomi/Finland

Sanofi Oy

Puh/Tel: +358 (0) 201 200 300


Κύπρος

C.A. Papaellinas Ltd.

Τηλ: +357 22 741741

Sverige

Sanofi AB

Tel: +46 (0)8 634 50 00


Latvija

Swixx Biopharma SIA Tel: +371 6 616 47 50

United Kingdom (Northern Ireland) sanofi-aventis Ireland Ltd. T/A SANOFI Tel: +44 (0) 800 035 2525


This leaflet was last revised in MMM/YYYY.

The following information is intended for healthcare professionals only.


PRACTICAL INFORMATION FOR MEDICAL OR HEALTHCARE PROFESSIONALS ON PREPARATION, ADMINISTRATION AND HANDLING OF JEVTANA 60 mg CONCENTRATE AND SOLVENT FOR SOLUTION FOR INFUSION


This information supplements sections 3 and 5 for the user.

It is important that you read the entire content of this procedure prior to the preparation of the infusion solution.


Incompatibilities


This medicine must not be mixed with other medicines except those used for the dilutions.


Shelf life and special precautions for storage


For the pack of JEVTANA 60 mg concentrate and solvent Do not store above 30°C.

Do not refrigerate.


After opening

The concentrate and solvent vials must be used immediately. If not used immediately, in-use storage times and conditions are the responsibility of the user. From a microbiological point of view, the

two-step dilution process must take place in controlled and aseptic conditions (see below “Preparation and administration precautions”).


After initial dilution of JEVTANA 60 mg concentrate with the entire contents of the solvent vial chemical and physical in-use stability has been demonstrated for 1 hour at ambient temperature.

After final dilution in the infusion bag/bottle

Chemical and physical stability of the infusion solution has been demonstrated for 8 hours at ambient temperature (15°C - 30°C) including the 1-hour infusion time and for 48 hours at refrigerated conditions including the 1-hour infusion time.


From a microbiological point of view, the infusion solution should be used immediately. If not used immediately, in-use storage times and conditions are the responsibility of the user and would normally not be longer than 24 hour at 2°C – 8°C, unless dilution has taken place in controlled and validated aseptic conditons.


Preparation and administration precautions


As for any other antineoplastic agent, caution should be exercised when handling and preparing JEVTANA solutions, taking into account the use of containment devices, personal protective equipment (e.g. gloves), and preparation procedures.

If JEVTANA, at any step of its handling, should come into contact with the skin, wash immediately and thoroughly with soap and water. If it should come into contact with mucous membranes, wash immediately and thoroughly with water.


JEVTANA should only be prepared and administered by personnel trained in handling cytotoxic agents. Pregnant staff should not handle it.


Always dilute the concentrate for solution for infusion with the entire supplied solvent before adding to infusion solutions.


Preparation steps


Read this ENTIRE section carefully before mixing and diluting. JEVTANA requires TWO dilutions prior to administration. Follow the preparation instructions provided below.

Note: Both the JEVTANA 60 mg/1.5 ml concentrate vial (fill volume: 73.2 mg of cabazitaxel/1.83 ml) and the solvent vial (fill volume: 5.67 ml) contain an overfill to compensate for liquid loss during preparation. This overfill ensures that after dilution with the ENTIRE contents of the accompanying solvent, there is solution containing 10 mg/ml cabazitaxel.


The following two-step dilution process must be carried out in an aseptic manner for preparing the solution for infusion.


Step 1: Initial dilution of the concentrate for solution for infusion with the supplied solvent.


image

Step 1.1


Inspect the concentrate vial and the supplied solvent. The concentrate solution and the solvent should be clear.


Concentrate vial (60 mg - 1.5 ml)

Solvent vial

image

Step 1.2

Using a syringe fitted with a needle, aseptically withdraw the entire contents of the supplied solvent by partially inverting the vial.


Solvent vial


image

Step 1.3


Inject the entire contents into the corresponding concentrate vial.


Concentrate- solvent mixture 10 mg/ml

Solvent vial

To limit foaming as much as possible when injecting the solvent, direct the needle onto the inside wall of the vial of concentrate solution and inject slowly.


Once reconstituted, the resultant solution contains 10 mg/ml of cabazitaxel.

image

Step 1.4


Remove the syringe and needle and mix manually and gently by repeated inversions until obtaining a clear and homogeneous solution. It could take approximately

45 seconds.


Concentrate-solvent mixture 10 mg/ml


image

Step 1.5

Let this solution stand for approximately

5 minutes and check then that the solution is homogeneous and clear.

It is normal for foam to persist after this time period.


Concentrate-solvent mixture 10 mg/ml

This resulting concentrate-solvent mixture contains 10 mg/ml of cabazitaxel (at least 6 ml deliverable volume). The second dilution should be done immediately (within 1 hour) as detailed in Step 2.


More than one vial of the concentrate-solvent mixture may be necessary to administer the prescribed dose.


Step 2: Second (final) dilution for infusion


image

Step 2.1


Aseptically withdraw the required amount of concentrate-solvent mixture (10 mg/ml of cabazitaxel), with a graduated syringe fitted with a needle. As an example, a dose of 45 mg JEVTANA would require 4.5 ml of the concentrate solvent mixture prepared following Step 1.


Since foam may persist on the wall of the vial of this solution, following its preparation described in Step 1, it is preferable to place the needle of the syringe in the middle when extracting.


Concentrate-solvent mixture 10 mg/ml


image

Step 2.2


Inject in a sterile PVC-free container of either 5% glucose solution or sodium chloride

9 mg/ml (0.9%) solution for infusion. The concentration of the infusion solution should be between 0.10 mg/ml and 0.26 mg/ml.


Step 2.3


Remove the syringe and mix the content of the infusion bag or bottle manually using a rocking motion.


Step 2.4


As with all parenteral products, the resulting infusion solution should be visually inspected prior to use. As the infusion solution is supersaturated, it may crystallize over time. In this case, the solution must not be used and should be discarded.


Required amount of concentrate-solvent mixture


image

5% glucose solution or sodium chloride 9 mg/ml (0.9%) solution for infusion


image

The infusion solution should be used immediately. However, in-use storage time can be longer under specific conditions mentioned in section Shelf life and special precautions for storage above.


Any unused medicinal product or waste material should be disposed of in accordance with local requirements.


Method of administration


JEVTANA is administered as a 1 hour infusion.

An in-line filter of 0.22 micrometer nominal pore size (also referred to as 0.2 micrometer) is recommended during administration.

PVC infusion containers or polyurethane infusion sets should not be used for the preparation and administration of the infusion solution.