Home page Home page

Somavert
pegvisomant

Package leaflet: Information for the user


SOMAVERT 10 mg powder and solvent for solution for injection SOMAVERT 15 mg powder and solvent for solution for injection SOMAVERT 20 mg powder and solvent for solution for injection SOMAVERT 25 mg powder and solvent for solution for injection SOMAVERT 30 mg powder and solvent for solution for injection pegvisomant


Read all of this leaflet carefully before you start using this medicine because it contains important information for you.


What SOMAVERT looks like and contents of the pack

SOMAVERT is presented as a powder and a solvent for injection (either 10 mg, 15 mg, 20 mg, 25 mg or 30 mg pegvisomant in a vial and 1 ml of solvent in a pre-filled syringe). Pack sizes of 1 and/or 30. Not all pack sizes are marketed. The powder is white and the solvent is clear and colourless.


Marketing Authorisation Holder and Manufacturer: Marketing Authorisation Holder:

Pfizer Europe MA EEIG Boulevard de la Plaine 17 1050 Bruxelles

Belgium


Manufacturer:


Pfizer Manufacturing Belgium NV Rijksweg 12

2870 Puurs Belgium


For any information about this medicine, please contact the local representative of the Marketing Authorisation Holder.


België/Belgique/Belgien Luxembourg/Luxemburg

Pfizer S.A./N.V. Pfizer S.A.

Tél/Tel: +32 (0)2 554 62 11 Tél/Tel: +32 (0)2 554 62 11


България Magyarország

Пфайзер Люксембург САРЛ, Клон България Pfizer Kft.

Тел.: +359 2 970 4333 Tel.: + 36 1 488 37 00

Česká republika Malta

Pfizer, spol. s r.o. Vivian Corporation Ltd.

Tel: +420 283 004 111 Tel: +356 21344610


Danmark Nederland

Pfizer ApS Pfizer bv

Tlf: +45 44 20 11 00 Tel: +31 (0)10 406 43 01


Deutschland Norge

Pfizer Pharma GmbH Pfizer AS

Tel: +49 (0)30 550055 51000 Tlf: +47 67 52 61 00


Eesti Österreich

Pfizer Luxembourg SARL Eesti filiaal Pfizer Corporation Austria Ges.m.b.H. Tel: +372 666 7500 Tel: +43 (0)1 521 15-0


Ελλάδα Polska

PFIZER ΕΛΛΑΣ Α.Ε. Pfizer Polska Sp. z o.o.

Τηλ.: +30 210 6785800 Tel.: +48 22 335 61 00


España Portugal

Pfizer S.L. Laboratórios Pfizer, Lda.

Tel: +34 91 490 99 00 Tel: +351 21 423 5500


France România

Pfizer Pfizer România S.R.L.

Tél: +33 (0)1 58 07 34 40 Tel: +40 (0)21 207 28 00


Hrvatska Slovenija

Pfizer Croatia d.o.o. Pfizer Luxembourg SARL, Pfizer, podružnica za svetovanje s področja farmacevtske dejavnosti, Ljubljana

Tel: + 385 1 3908 777 Tel: + 386 (0)1 52 11 400


Ireland Slovenská republika

Pfizer Healthcare Ireland Pfizer Luxembourg SARL, organizačná zložka

Tel: 1800 633 363 (toll free)

+44 (0)1304 616161

Tel: + 421 2 3355 5500


Ísland Suomi/Finland

Icepharma hf. Pfizer Oy

Sími: + 354 540 8000 Puh/Tel: +358 (0)9 43 00 40


Italia Sverige

Pfizer S.r.l. Pfizer AB

Tel: +39 06 33 18 21 Tel: +46 (0)8 550 520 00


Κύπρος United Kingdom (Northern Ireland)

PFIZER ΕΛΛΑΣ Α.Ε. (CYPRUS BRANCH) Pfizer Limited

Τηλ: +357 22 817690 Tel: +44 (0)1304 616161


Latvija

Pfizer Luxembourg SARL filiāle Latvijā Tel: +371 670 35 775


Lietuva

Pfizer Luxembourg SARL filialas Lietuvoje

Tel. +3705 2514000


This leaflet was last revised in <{MM/YYYY}>.

. There are also links to other websites about rare diseases and treatments.


------------------------------------------------------------------------------------------------------------------------------

INSTRUCTIONS FOR USE

SOMAVERT powder in vial with solvent in a pre-filled syringe pegvisomant for injection

For Subcutaneous Injection Only single dose vial


SOMAVERT comes in a vial as a white block of powder. You must mix SOMAVERT with a liquid (diluent) before you can use it.

The liquid comes in a pre-filled syringe labeled Solvent for SOMAVERT’. Do not use any other liquid to mix with SOMAVERT.

It is important that you do not try to give yourself or someone else an injection unless you have received training from your healthcare provider.


Store the carton(s) of powder vials in the refrigerator at 2°C to 8°C and away from direct sunlight. The carton(s) containing the SOMAVERT powder vial(s) may be stored at room temperature up to a maximum of 25°C for a single period of up to 30 days. Write the Use by date on the carton including day/month/year (up to 30 days from the date removed from the refrigerator). The vial(s) must be protected from light. Do not return this medicine to refrigerator.


Discard this medicine if not used by the new Use by date or the expiry date printed on the carton, whichever is earlier.


The pre-filled solvent syringe may be stored at room temperature. Keep out of reach of children.


  1. Things you need


    A single SOMAVERT pack containing:

    • A vial of SOMAVERT powder.

    • A pre-filled syringe with solvent.

    • A safety needle. You will also need:

    • A cotton ball.

    • An alcohol swab.

    • A suitable sharps container.


      image


  2. Getting ready


    Before you start:

    • Only mix SOMAVERT and the solvent when you are ready to inject your dose.

    • Remove a single SOMAVERT pack from the refrigerator and allow it to come to room temperature naturally in a safe place.

    • Wash your hands with soap and water, and dry thoroughly.

    • Peel open the packaging of the syringe and safety needle to make it easier to pick up each item as you prepare for your injection.

    • Do not use the syringe or vial if:

      • they are damaged or faulty;

      • the expiration date has passed;

      • it has been frozen, even if it has now thawed (syringe only).


  3. Choose injection area


    image


    • Choose a different location within an area for each injection.

    • Avoid bony areas or areas that are bruised, red, sore or hard, or areas that have scars or skin conditions.

    • Clean the injection area with the alcohol swab as instructed by your healthcare provider.

    • Allow the injection area to dry.


  4. Remove vial cap


    image


    • Remove the cap from the vial.

    • Throw the cap away; it is not needed again.

      Caution: Do not let anything touch the vial stopper.


  5. Remove syringe cap


    image


    • Snap off the syringe cap. It may take more effort to snap off than you might expect.

    • Throw the syringe cap away; it is not needed again.

    • Keep the syringe upright to avoid leakage.

      Caution: Do not let the end of the syringe touch anything when the syringe cap is off.


      image


    • Twist the safety needle firmly onto the syringe as far as it will go.


  1. Remove needle cover


    image


    • Fold the needle guard out of the way of the needle cover.

    • Carefully pull the needle cover straight off.

    • Throw the needle cover away; it is not needed again.

      Caution: Do not let the needle touch anything.


      image


    • Push the needle through the centre of vial stopper, as shown.

    • Support the syringe while the needle is in the vial stopper to prevent bending the needle.


  1. Add liquid


    image


    • Tilt both the vial and syringe at an angle, as shown.

    • Push the plunger rod down slowly until all the liquid has emptied into the vial.

    • Caution: Do not squirt the liquid directly onto the powder, as this creates foam. Foam makes the medicine unusable.

    • Do not withdraw the needle yet.


      image


    • Support both the syringe and vial in one hand, as shown.

    • Gently swirl the liquid, sliding the vial in a circular motion on a flat surface.

    • Continue swirling the liquid until all the powder has fully dissolved.

Note: This may take up to 5 minutes.


  1. Check medicine


    image


    • Keeping the needle in the vial, look carefully at the medicine. It must be clear and free of particles.

    • Do not use if:

      • the medicine is cloudy or hazy;

      • the medicine has any colour at all;

      • there are any particles or there is a layer of foam in the vial.


        image


    • Turn the vial so that you can see the stopper gap, as shown.

    • Pull the needle down so that the needle tip is at the lowest point in the liquid. This will help you to draw off as much liquid as possible.

    • Check that the plunger rod has not moved—if it has, then push it back all the way into the syringe. This ensures that all air is removed from the syringe before you draw off the dose.


  1. Draw off dose


    image


    • Slowly pull back the plunger rod to withdraw as much medicine as possible from the vial.

      Note: If you see air in the syringe, tap the barrel to float the bubbles to the top,and then gently push the bubbles out into the vial.

    • Pull the needle out of the vial.


      image


    • Gently pinch the skin at the site of injection.

    • Insert the needle to its full depth into the pinched skin.


  1. Inject medicine


    image


    • Push the plunger rod down slowly until the barrel is empty.

      Note: Make sure you keep the needle in at full depth.

    • Release the pinched skin and pull the needle straight out.


      image


    • Fold the needle guard over the needle.

    • Gently apply pressure using a hard surface to lock the needle guard in place.

Note: You will hear a click when the needle guard has been locked.


  1. Dispose


    image


    • The syringe and needle should NEVER be reused. Dispose of the needle and syringe as instructed by your doctor, nurse or pharmacist and in accordance with local health and safety laws.


      image


    • If necessary, use a clean cotton ball and press lightly on the injection area.

    • Do not rub the area.


      QUESTIONS & ANSWERS


      What should I do if anything has accidentally touched the vial stopper?

    • Clean the vial stopper with a fresh alcohol wipe, and leave it to dry completely. If you are unable to clean the stopper, do not use the vial.


      What should I do with the syringe if it has been dropped?

    • Do not use it—even if it looks undamaged. Dispose of the syringe in the same way as a used syringe. You will need a replacement syringe.


      How many times can I safely insert the needle into the vial stopper?

    • Once only. Withdrawing and reinserting greatly increases the risk of needle damage, and will blunt the needle. This can cause discomfort and increases risk of skin damage and infection. There is also a risk you may lose some of the medicine.


      Is it OK to shake the vial if the powder is not dissolving?

    • No—never shake the vial. Shaking can destroy the medicine and create foam. The powder may take a few minutes to dissolve fully, so continue swirling the vial gently until the liquid is completely clear.


      How can I tell if there is any foam in the vial?

      • Foam looks like a mass of small bubbles that float as a layer to the top of the liquid. Do not inject SOMAVERT if it has foamed.


      image


      How can I prevent the medicine from foaming?

    • Press the plunger very slowly so that the liquid gently runs down the inside of the vial.

Do not spray the liquid directly onto the powder, as this creates foam. This technique will also reduce the swirling time and allow more of the medicine to be drawn off.


I can see some air in the syringe. Is this OK?