Home page Home page

Filgrastim Hexal
filgrastim

Package leaflet: Information for the user


Filgrastim HEXAL 30 MU/0.5 mL solution for injection or infusion in pre-filled syringe Filgrastim HEXAL 48 MU/0.5 mL solution for injection or infusion in pre-filled syringe filgrastim


Read all of this leaflet carefully before you start using this medicine because it contains important information for you.

What Filgrastim HEXAL looks like and contents of the pack


Filgrastim HEXAL is a clear, colourless to slightly yellowish solution for injection or infusion in pre- filled syringe.


Filgrastim HEXAL is available in packs containing 1, 3, 5 or 10 pre-filled syringes with injection needle and with or without a needle safety guard.


Not all pack sizes may be marketed.


Marketing Authorisation Holder


HEXAL AG

Industriestr. 25

83607 Holzkirchen Germany


Manufacturer


Sandoz GmbH Biochemiestr. 10

6336 Langkampfen Austria


This leaflet was last revised in {MM/YYYY}.


.


------------------------------------------------------------------------------------------------------------------------


Instructions on how to inject yourself


This section contains information on how to give yourself an injection of Filgrastim HEXAL. It is important that you do not try to give yourself the injection unless you have received special training from your doctor or nurse. Filgrastim HEXAL is provided with or without a needle safety guard and you will be shown how to use this by your doctor or nurse. If you are not sure about giving the injection or you have any questions, please ask your doctor or nurse for help.


  1. Wash your hands.

  2. Remove one syringe from the pack and remove the protective cap from the injection needle.

    Syringes are embossed with graduation rings in order to enable partial use if required. Each graduation ring corresponds to a volume of 0.1 mL. If partial use of a syringe is required, remove unwanted solution before injection.

  3. Clean the skin at the injection site using an alcohol wipe.

  4. Form a skin fold by pinching the skin between thumb and forefinger.

  5. Insert the needle into the skin fold with a quick, firm action. Inject the Filgrastim HEXAL solution as you have been shown by your doctor. You should check with your doctor or pharmacist if you are not sure.


    image

    Pre-filled syringe without needle safety guard


  6. Always keeping your skin pinched, depress the plunger slowly and evenly.

  7. After injecting the liquid, remove the needle and let go of your skin.

  8. Put the used syringe in the disposal container. Use each syringe only for one injection.

Pre-filled syringe with needle safety guard


image

  1. Always keeping your skin pinched, depress the plunger slowly and evenly until the entire dose has been given and the plunger cannot be depressed any further. Do not release the pressure on the plunger!

  2. After injecting the liquid, remove the needle while maintaining pressure on the plunger and then let go of your skin.

  3. Let go of the plunger. The needle safety guard will rapidly move to cover the needle.

  4. Discard any unused product or waste material. Only use each syringe for one injection.


-------------------------------------------------------------------------------------------------------------------------


The following information is intended for healthcare professionals only:


The solution should be visually inspected prior to use. Only clear solutions without particles should be used. Accidental exposure to freezing temperatures does not adversely affect the stability of Filgrastim HEXAL.


Filgrastim HEXAL contains no preservative: In view of the possible risk of microbial contamination, Filgrastim HEXAL syringes are for single use only.


Dilution prior to administration (optional)


If required, Filgrastim HEXAL may be diluted in glucose 50 mg/mL (5%) solution. Filgrastim HEXAL must not be diluted with sodium chloride solutions.


Dilution to a final concentration < 0.2 MU/mL (2 μg/mL) is not recommended at any time.


For patients treated with filgrastim diluted to concentrations < 1.5 MU/mL (15 μg/mL), human serum albumin (HSA) should be added to a final concentration of 2 mg/mL.


Example: In a final volume of 20 mL, total doses of filgrastim less than 30 MU (300 μg) should be given with 0.2 mL of human serum albumin 200 mg/mL (20%) solution Ph. Eur. added.


When diluted in glucose 50 mg/mL (5%) solution, filgrastim is compatible with glass and a variety of plastics including polyvinylchloride, polyolefin (a copolymer of polypropylene and polyethylene) and polypropylene.


After dilution: Chemical and physical in-use stability of the diluted solution for infusion has been demonstrated for 24 hours at 2°C to 8°C. From a microbiological point of view, the product should be used immediately. If not used immediately, in-use storage times and conditions prior to use are the responsibility of the user and would normally not be longer than 24 hours at 2°C to 8°C, unless dilution has taken place in controlled and validated aseptic conditions.


Using the pre-filled syringe with a needle safety guard


The needle safety guard covers the needle after injection to prevent needle stick injury. This does not affect normal operation of the syringe. Depress the plunger slowly and evenly until the entire dose has been given and the plunger cannot be depressed any further. While maintaining pressure on the plunger, remove the syringe from the patient. The needle safety guard will cover the needle when releasing the plunger.


Using the pre-filled syringe without a needle safety guard


Administer the dose as per standard protocol.

Disposal


Any unused product or waste material should be disposed of in accordance with local requirements.