Home page Home page

Ecalta
anidulafungin

Package leaflet: Information for the user


ECALTA 100 mg powder for concentrate for solution for infusion

Anidulafungin


Read all of this leaflet carefully before you or your child start using this medicine because it contains important information for you.


What ECALTA looks like and contents of the pack


ECALTA is supplied as a box containing 1 vial of 100 mg powder for concentrate for solution for infusion.


The powder is white to off-white.


Marketing Authorisation Holder


Pfizer Europe MA EEIG, Boulevard de la Plaine 17, 1050 Bruxelles, Belgium


Manufacturer


Pfizer Manufacturing Belgium NV, Rijksweg 12, 2870 Puurs, Belgium


For any information about this medicine, please contact the local representative of the Marketing Authorisation Holder:


België/Belgique/Belgien Luxembourg/Luxemburg Pfizer NV/SA

Tél/Tel: +32 (0)2 554 62 11

Lietuva

Pfizer Luxembourg SARL filialas Lietuvoje

Tel. +3705 2514000


България

Пфайзер Люксембург САРЛ, Клон България Тел.: +359 2 970 4333

Magyarország

Pfizer Kft.

Tel. + 36 1 488 37 00


Česká republika

Pfizer, spol. s r.o.

Tel: +420-283-004-111

Danmark

Pfizer ApS

Tlf: +45 44 20 11 00

Malta

Vivian Corporation Ltd. Tel : +356 21344610

Nederland

Pfizer bv

Tel: +31 (0)10 406 43 01


Deutschland

PFIZER PHARMA GmbH Tel: +49 (0)30 550055-51000

Norge

Pfizer AS

Tlf: +47 67 52 61 00


Eesti

Pfizer Luxembourg SARL Eesti filiaal Tel: +372 666 7500

Österreich

Pfizer Corporation Austria Ges.m.b.H. Tel: +43 (0)1 521 15-0


Ελλάδα

Pfizer ΕΛΛΑΣ A.E. Τηλ.: +30 210 6785 800

Polska

Pfizer Polska Sp. z o.o., Tel.: +48 22 335 61 00

España

Pfizer, S.L.

Tel: +34 91 490 99 00

Portugal

Laboratórios Pfizer, Lda. Tel: + 351 214 235 500


France

Pfizer

Tél: +33 (0)1 58 07 34 40

România

Pfizer România S.R.L Tel: +40 (0)21 207 28 00


Hrvatska

Pfizer Croatia d.o.o.

Tel: + 385 1 3908 777


Ireland

Pfizer Healthcare Ireland Tel: 1800 633 363 (toll free)

Tel: +44 (0)1304 616161

Slovenija

Pfizer Luxembourg SARL

Pfizer, podružnica za svetovanje s področja farmacevtske dejavnosti, Ljubljana

Tel: + 386 (0)152 11 400

Slovenská republika

Pfizer Luxembourg SARL, organizačná zložka Tel: +421-2-3355 5500


Ísland

Icepharma hf.,

Sími: + 354 540 8000

Suomi/Finland

Pfizer Oy

Puh/Tel: +358(0)9 43 00 40


Italia

Pfizer S.r.l.

Tel: +39 06 33 18 21

Sverige

Pfizer AB

Tel: +46 (0)8 5505 2000


Kύπρος

Pfizer ΕΛΛΑΣ Α.Ε. (Cyprus Branch) Τηλ: +357 22 817690

United Kingdom (Northern Ireland)

Pfizer Limited

Tel: +44 (0)1304 616161


Latvija

Pfizer Luxembourg SARL Filiāle Latvijā

Tel: +371 670 35 775


This leaflet was last revised in {MM/YYYY}.


.


--------------------------------------------------------------------------------------------------------------------------

The following information is intended for medical or healthcare professionals only and applies only to the single vial ECALTA 100 mg powder for concentrate for solution for infusion presentation:


The contents of the vial must be reconstituted with water for injection and subsequently diluted with ONLY 9 mg/mL (0.9%) sodium chloride for infusion or 50 mg/mL (5%) glucose for infusion. The compatibility of reconstituted ECALTA with intravenous substances, additives, or medicines other than 9 mg/mL (0.9%) sodium chloride for infusion or 50 mg/mL (5%) glucose for infusion has not been established. The infusion solution must not be frozen.


Reconstitution

Aseptically reconstitute each vial with 30 mL water for injection to provide a concentration of

    1. mg/mL. The reconstitution time can be up to 5 minutes. After subsequent dilution, the solution is to be discarded if particulate matter or discolouration is identified.

      The reconstituted solution may be stored up to 25°C for up to 24 hours prior to further dilution.


      Dilution and infusion

      Parenteral medicinal products should be inspected visually for particulate matter and discolouration prior to administration, whenever solution and container permit. If either particulate matter or discolouration is identified, discard the solution.


      Adult Patients


      Aseptically transfer the contents of the reconstituted vial(s) into an intravenous bag (or bottle) containing either 9 mg/mL (0.9%) sodium chloride for infusion or 50 mg/mL (5%) glucose for infusion to obtain the appropriate anidulafungin concentration. The table below provides the dilution to a concentration of 0.77 mg/mL for the final infusion solution and infusion instructions for each dose.


      Dilution requirements for ECALTA administration


      Dose

      Number of vials of powder

      Total reconstituted volume

      Infusion volume A

      Total infusion volume B

      Rate of infusion

      Minimum duration of infusion

      100 mg

      1

      30 mL

      100 mL

      130 mL

      1.4 mL/ min or 84 mL/ hour

      90 min

      200 mg

      2

      60 mL

      200 mL

      260 mL

      1.4 mL/ min or 84 mL/ hour

      180 min

      A Either 9 mg/mL (0.9%) sodium chloride for infusion or 50 mg/mL (5%) glucose for infusion.

      B Infusion solution concentration is 0.77 mg/mL


      The rate of infusion should not exceed 1.1 mg/min (equivalent to 1.4 mL/min or 84 mL/hour when reconstituted and diluted per instructions).


      Paediatric Patients


      For paediatric patients aged 1 month to < 18 years, the volume of infusion solution required to deliver the dose will vary depending on the weight of the patient. The reconstituted solution must be further diluted to a concentration of 0.77 mg/mL for the final infusion solution. A programmable syringe or infusion pump is recommended. The rate of infusion should not exceed 1.1 mg/minute (equivalent to 1.4 mL/minute or 84 mL/hour when reconstituted and diluted per instructions).


      1. Calculate patient dose and reconstitute vial(s) required according to reconstitution instructions to provide a concentration of 3.33 mg/mL


      2. Calculate the volume (mL) of reconstituted anidulafungin required:


        • Volumeofanidulafungin(mL) = Dose of anidulafungin (mg) 3.33 mg/mL


      3. Calculate the total volume of dosing solution (mL) required to provide a final concentration of

          1. mg/mL:


            • Totalvolumeofdosingsolution(mL) = Dose of anidulafungin (mg) ÷ 0.77 mg/mL

      4. Calculate the volume of diluent [5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP (normal saline)] required to prepare the dosing solution:


        • Volumeofdiluent(mL) = Total volume of dosing solution (mL) – Volume of anidulafungin (mL)


      5. Aseptically transfer the required volumes (mL) of anidulafungin and 5% Dextrose Injection, USP or 0.9% Sodium Chloride Injection, USP (normal saline) into an infusion syringe or IV infusion bag needed for administration.


For single use only. Waste materials should be disposed of in accordance with local requirements.